Amurka Nasco Sludge Judge ® Lamar Samfurin Bar Coal Lamar Bincike C09247

Sludge Judge ® - 15 ft. (4.60 m)

Product Number: C09247

Za a iya sauki, daidai gano da kuma auna kasa sanya lakar, zurfin kuskure na 5%, dace da daban-daban ruwa, amfani da shi a sharar ruwa tsaftacewa masana'antu, sinadarai masana'antu, abinci masana'antu da kuma daban-daban bukatar daidai lura da karfi ruwa rabuwa yanayin lokuta. Brand: Amurka NASCO shawarar masana'antu: coal mine, geological bincike, tsabtace ruwa masana'antu, sinadarai masana'antu abinci masana'antu da sauransu

NASCO mud samfurin bar aka tsara musamman don ɗaukar daidai karatu na m ruwa, m abun ciki ≤5%, za a iya amfani da shi a cikin nau'ikan ruwa, kowane zurfin. Yana dacewa da duk inda ake buƙatar auna daidai matakan samfurin sedimentable kamar masana'antun tsaftacewa, masana'antun sinadarai da masana'antun sarrafa abinci. Yana da lalata juriya. Za a iya ɗaukar samfurin 3oz (89ml / 0.31m) a kowace ƙafa.

Ba za a iya amfani da shi a cikin ruwa da zafin jiki ya wuce 165 ℃ (74 ℃) kuma ba zai iya jure tasirin mai zafi ba.

Amurka nasco mud samfurin bar kwal mud ganowa Hanyar amfani:

1, a hankali sanya lakar samfurin bar zuwa kasa na wanka.

A、 Floating bawul bude, sa abu gudana cikin. Lokacin da lakar samfurin bar ya kai kasa na wanka da kuma abubuwa a cikin bututun da aka cika zuwa matakin farfajiyar, ɗan ɗan jawo igiya don ɗaga samfurin bar.

B、 Rufe dakatar da reverse, rufe cakuda a cikin bututun.

2. Lokacin da aka cire sandar samfurin lakar gaba ɗaya daga ruwa, za a iya karanta adadin samfurin mai ƙarfi kai tsaye daga alamun da aka alama a kan bututun. Sake abubuwa a cikin bututun, muddin matsa da kuma riƙe da bolt a kasa, za a iya buɗe reverse bawul fitar da samfurin.

Alamar Model:

C09247WA: Saitin, 15-ft. (4.60m)

C09249WA: Samfurin sanduna jaka;

Sashe daban-daban:

C09250WA: tare da bawul kasa, 5-ft. (1.53m);

C09251WA: Tsakiyar tsawo, 5-ft. (1.53m);

C09252WA: Sama da igiya.

Do NOT use for sampling ethanol or ethanol blended fuel. Use Nasco fuel sampler (B01477).

The Sludge Judge ® is designed to take accurate readings of settleable solids, 5% or less, in a variety of liquids, to any depth. It is ideal for sewage treatment plants, chemical plants, and food processing facilities - anywhere that accurate sample levels of settleable solids in noncaustic materials are needed. The unit holds approximately 3 oz. per foot (89 ml per 0.31 m). The Sludge Judge ® comes in 5 ft. (1.53 m) sections of 3/4 in. (1.90 cm) plastic pipe with screw-type connectors. The top section includes a nylon rope for raising and lowering the sampler. Individual sections can be combined as required to achieve the length needed. Do not use in liquids over 165 ° F (74° C). Sludge Judge ® is not autoclavable. A convenient cotton canvas carrying case that holds four sections, a cleaning brush, cleaning rod, and cotton strips are available.

To use:

1. Slowly lower the Sludge Judge ® to the bottom of the tank. The float valve opens (see figure A), allowing materials to flow in. When the bottom has been reached and the pipe has filled to the surface level, tug slightly on the rope as the unit is raised. This sets the check valve(see figure B), trapping the mixture inside.

2. When the unit has been raised clear of the liquid, the amount of solids in the sample can be read using the 1 ft. (0.31 m) increments marked on the pipe sections. To release the material in the unit, touch the pin extending from the bottom section against a hard surface. This opens the check valve to drain the sample. One-year warranty.